Table of Contents
Advertisement
To register BT Diverse
2000/3000/4000 series
handsets and other makes
Providing your handset is
GAP (Generic Access Profile)
compliant, you can register it
to your BT Diverse 5250 base.
Place your handset into
registration mode according
to the instructions in its user
guide.
When the handset is in
registration mode, you will
need to press the PAGE button
located on the top of your
BT Diverse 5250 base station,
for approximately three
seconds. After a short period
of time the handset will be
registered. The BT Diverse
5250 will allocate the next
available handset number.
To check that the handset has
registered successfully to the base,
press the PAGE button, all handsets
will ring.
56
BT Diverse 5250 ~ 5th Edition ~ 20th May '03 ~ 5187
Note
BT Diverse Helpline – 08457 908 070
To de-register a handset
Press the INT options button
INT
to display the list of internal
handsets registered
to the base.
Press the UP or DOWN
navigation button to select the
handset you want to de-register.
Press the MENU options button.
MENU
Press the DOWN navigation
button until the display shows
De-register Handset .
Press the OK options button.
OK
Enter the base station PIN
(original setting =
Press the OK options button.
OK
Display shows
handset?
Press the OK options button to
OK
confirm de-registration.
Press the RED PHONE button
to confirm de-registration.
0000 ).
deregister
Advertisement
Table of Contents
