Water Hardness - BIANCHI VENDING BVM 333 Manual

F) WATER HARDNESS
The hardness of the tap water varies with each region and you should test the hardness of the water you are going to use in your coffee-maker. Once
the coffee-maker has been programmed with the hardness of the water, it will indicate when the lime scale should be removed from the system.
First of all, test the water hardness. To do this, put the strip of reagent in the water for one second. Some of the squares on the strip of reagent will
change colour. The hardness of the water will be equal to the number of squares that change colour.
1. The coffee-maker is ready
2. Press the 'P' button to enter the programming menu.
3. Press the '>' icon until the 'water hardness' icon is displayed.
4. To programme the water hardness, press 'P'. .
5. After pressing 'P', the water hardness menu is displayed on the screen.
Press '>' to increase the water hardness level from 1 to 5 (after 5, it returns
to 1).
By default, the coffee-maker is programmed with a water hardness
level of 5.
6. To confi rm your selection, press 'P'.
To exit the programming mode, press 'Esc'.
7. The coffee-maker is ready.
Downloaded from CoffeeMachineManual.com Manuals
Sequence
Press the
button
P
>
P
>
P
Esc
25
Message on screen