BIANCHI VENDING BVM 333 Manual page 19

A) ADJUSTING THE AMOUNT OF WATER FOR AN ESPRESSO COFFEE
1. The coffee-maker is ready.
2. Press the 'P' button to enter the programming menu.
3. The fi rst programme is for adjusting the amount of water per cup. You
can programme the amount for each type of coffee you can obtain. To help
you, the four possibilities will begin to fl ash.
4. To programme the amount of water for an espresso coffee, press the
corresponding button.
5. After pressing the button for 1 cup of espresso coffee, you enter the
menu for programming the amount of water.
Press the 'arrow' to increase the amount of water by 10 ml from 30 ml to
60 ml.
By default, the coffee-maker is programmed with 40 ml for an espresso
coffee.
6. To confi rm your selection, press 'P'.
To exit the programming mode, press 'Esc'.
7. The coffee-maker is ready.
Downloaded from CoffeeMachineManual.com Manuals
Sequence
Press the
button
P
>
P
Esc
20
Message on screen.