BIANCHI VENDING BVM 333 Manual page 21

C) ADJUSTING THE AMOUNT OF WATER FOR 2 ESPRESSOS
1. The coffee-maker is ready.
2. Press the 'P' button to enter the programming menu. .
3. The fi rst programme is for adjusting the amount of water per cup. You
can programme the amount for each type of coffee you can obtain. To help
you, the four possibilities will begin to fl ash.
4. To programme the amount of water for 2 espresso coffees, press the
corresponding button.
5. After pressing the button for 2 espresso coffees, you enter the menu for
programming the amount of water.
Press the 'arrow' to increase the amount of water by 10 ml from 30 ml to
60 ml.
By default, the coffee-maker is programmed with 40 ml for each cup of
espresso coffee.
6. To confi rm your selection, press 'P'.
To exit the programming mode, press 'Esc'
7. The coffee-maker is ready. .
Downloaded from CoffeeMachineManual.com Manuals
Sequence
Press the
button
P
>
P
Esc
22
Message on screen.