BIANCHI VENDING BVM 333 Manual page 18

14. Close the side cover.
IMPORTANT! When handling the unit for cleaning, the internal sy-
stem that compacts the coffee may move easily. To return it to its ori-
ginal position, use the brewing unit spanner supplied with the coffee-
maker. Make sure that the marks on the fi xed and
moving parts coincide. If not, proceed as follows:
Insert the spanner in the lock.
Turn the spanner to the left (anticlockwise) until the two marks on the
fi xed and moving parts coincide.
C) AUTO-CLEANING FUNCTION
The coffee-maker automatically performs three system-cleaning proces-
ses:
1) When you turn on the coffee-maker, it cleans the pipes with a little hot
water to make sure that the coffee it makes does not contain any traces
of water left in the pipes from coffee made previously.
Downloaded from CoffeeMachineManual.com Manuals
2) Before turning off and to prevent the coffee outlet from being blocked
with coffee remains, the coffee-maker expels a little water and cleans
the coffee outlet. This function has been designed to save you from
having to carry out this cleaning process manually.
3) If the auto-off function is disconnected, the coffee-maker will per-
form auto-cleaning every 14 cups (when the grounds compartment
is emptied).
18 PROGRAMMING
MAKER
The coffee-maker is programmed for use without it being necessary
to modify any parameters, but it offers the possibility of adapting it to
your personal preferences easily and intuitively. Consequently, we have
designed a simple menu for defi ning the various functions of the cof-
fee-maker.
You can programme the amount of water per cup. By default, the cof-
fee-maker is programmed with a certain amount of water for an espres-
so or large coffee. You can modify the amount of water set for each type
of coffee and adapt it to your personal preferences.
The coffee-maker can turn itself off to save energy and you can relax
when you leave your home, knowing that it will disconnect. Depending
on the use you make of your coffee-maker, you can programme the time
when you want your coffee-maker to turn off after it has been used.
The water in each area has a certain amount of lime that affects the
life of the coffee-maker. You can check the hardness of the water you
use and programme your coffee-maker to tell you when the lime scale
should be removed from the appliance. You can also select the contrast
level of the screen and whether or not you want the coffee-maker to
beep to tell you when the coffee or the steam is ready.
The following is a detailed explanation of how to use the programming
menu:
19
YOUR COFFEE-