Using The Navigation Bar; Using The Camera Toolbar - Lorex LNR100 SERIES Instruction Manual

8 Using the System
2. Adjust the Hue, Brightness, Contrast, and Saturation settings that the camera will
use. To enable custom Gain controls, check Gain and use the slider to configure the
gain level.
OR
Use Color mode to select a preset color profile.
Note
• Color settings will update once you save changes.
• To configure the Customized1~4 profiles, click Customized.
3. Click OK to save changes.

8.5 Using the Navigation Bar

The Navigation Bar gives quick access to certain functions and menus.
To open the Navigation bar:
• Left click on the screen to open the Navigation Bar. The Navigation Bar has the follow-
ing options:
3
1 2
1. Main Menu.
2. Collapse.
3. Select display layout.
4. PTZ: Click to open PTZ controls.
5. Search: Search and playback recorded video. See 16.3 Playback, page 78.
6. Alarm Status: View alarms in progress.
7. Network: Configure network settings for your system. See 14.3 Network, page 56.
8. HDD Manager: Manage hard drives connected to the system. See 14.2.3 Formatting Hard Drives,
page 54.
9. Info: Click to view system info.
10. Update: Click to check for firmware upgrades. The system must be connected to the Internet to
check for firmware upgrades.

8.6 Using the Camera Toolbar

The Camera Toolbar is used to perform actions on a specific channel.
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
#; r. 1.0/14396/14396; en-US
4 5 6 7 8 9
10
19