Lorex LNK7000X Series Quick Connection Manual

Package Contents:
HD NVR USB Mouse
Remote Control Power Cable**
Ethernet Cable HDMI Cable
Quick Start Guides
Need Help?
Visit us online for up-to-date software and
complete instruction manuals
1
Visit lorex.com
Search for the model number
2
of your product
Click on your product in the
3
search results
4
Click on the Downloads tab
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE. All
rights reserved.
Quick Connection Guide
Connecting Your System
1 2
IP Cameras*
Ethernet Extension Cable*
NOTE: It may take up to 1
minute for cameras to start
up and transmit video to
your NVR.
Recommended:
Connect cameras to a PoE switch* or router*
OR
Connect cameras on your network. See "Adding Cameras from
to the NVR. the LAN" on reverse for more details.
16/32 channel configuration shown. 8 channel units will have the respective number of video inputs.
For camera compatibility information, visit
Not included / sold separately.
*
8-channel units include a 48V DC power adapter rather than an AC power cord.
**
3
Router* Monitor*
!
The NVR is set to 720p
output by default. To optimize
picture quality, set the NVR's
video output to match the
resolution of your monitor.
OR
HDMI VGA*
Supports Supports
up to 4K up to 1080p
lorex.com/compatibility
LNK7000X Series
HD Network Video Surveillance Recorder
4 5
Mouse Power**
This system features automatic firmware
upgrades for enhanced functionality. It is
required to upgrade your system to the latest
firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK to
upgrade.
2. The system will download and install the
firmware upgrade. Wait for the firmware update
to complete. The system may restart during the
firmware upgrade process.
DO NOT power off or disconnect the power
cable during firmware installation.
6: ON
LNK7000X_QCG_EN_R1