14
Using the Main Menu
To configure privacy zones:
1. From the Main Menu, click
2. Click Overlay.
3. Under Cover-Area, check Monitor to enable privacy zones.
4. Check 1, 2, 3, or 4 to enable up to 4 privacy zones.
5. Click Set to configure privacy zones. Click and drag privacy zones to determine the
areas of the camera's view you would like to block. Click and drag near the edge of the
privacy zone to re-size it. Right-click when finished.
6. Click OK. Click OK in the Recording menu to save changes.
#; r. 1.0/14396/14396; en-US
and then click Recording.
46