Lorex LNR100 Series Quick Mobile Manual

Before You Start:
iPhone
1A
a Install the free FLIR Cloud™ app from the App
Store. Tap the FLIR Cloud™ icon to open the app.
b
Tap
c
Configure the following:
Tap Scan QR Code and line up the QR code on
1
the top of the NVR using the camera on your device.
1
Device ID: xxxxxxxxxxx
2
OR under Device ID, manually enter the Device ID
printed on the label.
3
Name: Choose a name for your system of your
2
choice.
4
3 Client Port: Enter the Client Port
5
(default: 35000).
Username: Enter the NVR's User Name
4
(default: admin).
Password: Enter the NVR's Password
5
(default: 000000).
Tap Start Live Preview. You will be prompted to change
d
the NVR password.
Enter a new 6 character password and tap OK. This password
f
will be used to log on to your system from now on.
g
The app opens in Live View and streams video from all
connected cameras.
LNR100 Series
Quick Mobile Guide
• Make sure you have a router and • Connect your NVR to your router
high-speed Internet access (not
included).
1B
a
Install the free FLIR Cloud™ app from the App
Store. Tap the FLIR Cloud™ icon to open the app.
b
Then tap + c
Tap Add.
d
Configure the following:
EXAMPLE
Tap Start Scanning and line up the
1
QR code on the top of the NVR using the
camera on your device.
Device ID: xxxxxxxxxxx
OR under Device ID, manually enter the
Device ID printed on the label.
2 Name: Choose a name for your NVR of
your choice.
3 Client Port: Enter the Client Port
(default: 35000).
User Name: Enter the NVR's User
4
Name (default: admin).
Password: Enter the NVR's Password
5
(default: 000000).
Channel amount: Enter the number of
6
channels your NVR has.
e Tap Start Live Preview. You will be prompted to change
the NVR password.
Enter a new 6 character password and tap OK. This password
f
will be used to log on to your system from now on.
g
The app opens in Live View and streams video from all
connected cameras.
Congratulations! You can now view video from your cameras on your smartphone or tablet.
• Upgrade your NVR firmware and
using an Ethernet cable (see the client software or mobile app to the
latest versions.
Quick Connection Guide for details).
iPad
Tap
Then tap
EXAMPLE
1
2
3
4
5
6
• Please note that an upload speed of
1Mbps is required for remote video
streaming. Up to 3 devices may
connect to the system at the same
time.
Android
1C
a Install the free FLIR Cloud™ app from the
Google Play Store. Tap the FLIR Cloud™ icon to
open the app.
b
Tap
c
Configure the following:
Tap Scan QR Code and line up the QR code on
1
the top of the NVR using the camera on your device.
1
Device ID: xxxxxxxxxxx
2
OR under Device ID, manually enter the Device ID
printed on the label.
3
2 Name: Choose a name for your system of your
choice.
4
Client Port: Enter the Client Port
3
5
(default: 35000).
Username: Enter the NVR's User Name
4
(default: admin).
5 Password: Enter the NVR's Password
(default: 000000).
d Tap Start Live Preview. You will be prompted to change
the NVR password.
Enter a new 6 character password and tap OK. This password
e
will be used to log on to your system from now on.
f The app opens in Live View and streams video from all
connected cameras.
3 Minutes
Then tap +
EXAMPLE