Step 4: Connect The Monitor; Step 5: Connect The Power Adapter To Power The Cameras - Lorex LNR100 SERIES Instruction Manual

6 Basic Setup (LNR100 Series)

6.4 Step 4: Connect the Monitor

• Connect the included HDMI cable from the HDMI port to the TV or monitor
(recommended).
OR
• Connect a VGA cable (not included) from the VGA port to the monitor.
1. VGA port.
2. HDMI port.

6.5 Step 5: Connect the Power Adapter to Power the Cameras

The system includes two power adapters. You must connect both to use the system. There
is a 48V power adapter that provides power to the cameras via the built-in Power over
Ethernet (PoE) switch and a 12V power adapter to power the NVR.
To connect the power adapter that powers the cameras:
• Connect the included 48V power adapter to the DC 48V port. Connect the end of the
power adapter to a wall socket or a surge protector.
#; r. 1.0/14396/14396; en-US
1
2
9