Presets - Lorex LNR100 SERIES Instruction Manual

20 Connecting a PTZ Camera (LNR100 Series)
PTZ actions
1
2
3
4
1. No.: Enter the number of the action you would like to call.
2. Pattern: Call selected pattern. A pattern will make the camera move between two
user-defined points.
3. AutoScan: Run auto scan. Auto scan makes the camera automatically cycle between
a left and right point.
4. Flip: Click to flip the camera 180°.
5. Preset: Click to move the camera to the selected preset position.
6. Tour: Click to start the selected tour. A tour will cycle through a set of saved presets.
7. AutoPan: Run auto pan. This will make the camera continuously pan 360°.
8. Reset: Click to reset the camera to its home position.

20.2.1 Presets

Presets will save a camera position for quick retrieval.
To add presets:
1. Move the camera to the desired position.
2. Click Set to open the action setup menu.
3. Select Preset.
#; r. 1.0/14396/14396; en-US
5
6
7
8
159