Section 3 - Configuration
Port Settings:
You may configure which ports to use for HTTP and RTSP access to the camera.
HTTPS Settings:
You may enable and configure which ports to use for HTTPS access to the camera.
UPnP Enable:
Enable this setting to configure your camera as an UPnP device in the network.
UPnP Port
Enable this to allow your camera to use UPnP to configure port forwarding on
Forward:
your router. Set the HTTP, HTTPS, and RTSP ports you wish to use for UPnP port
forwarding.
Bonjour:
Checking the Bonjour box will allow the camera to be discoverable on the
network and visible to Apple devices.
Click Save Settings to save your changes.
D-Link DCS-935L User Manual
26