Motion Detection - D-Link DCS-935L User Manual And Service Information

Section 3 - Configuration
Motion detection enables the camera to monitor the video feed for movement.
Enable Video Select this box to enable the motion detection feature of your camera.
Motion:
Sensitivity: Specifies how sensitive motion detection will be from 0% to 100%. A low
sensitivity setting means that there must be large changes between two images
in order to detect motion, and a high sensitivity setting means that even small
changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area that has flickering
lights or a window to the outside in view. High sensitivities may be useful when
monitoring an area that rarely changes, such as a storeroom or warehouse.
Drawing Mode: Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and drag
on the area that you would like to monitor for motion. Select Erase Motion Area
to clear a selected region and stop the camera from monitoring that area of the
picture.
Clear:
Clears all motion detection areas from the picture.
Click Save Settings to save your changes.
D-Link DCS-935L User Manual

Motion Detection

31