Specifications; Index - Marantz PM-11S3 Owner's Manual

Integrated amplifier
Hide thumbs Also See for PM-11S3:
Table of Contents

Advertisement

ENGLISH
Specifications
RMS Power output:
(20 Hz - 20 kHz 2-channel simultaneously driven)
Total harmonic distortion:
(20 Hz - 20 kHz 2-channel simultaneously driven, 8 Ω)
Output band width: (8 Ω, 0.05 %)
Frequency response: (CD, 1 W, 8 Ω load)
Damping factor: (8 Ω, 20 Hz − 20 kHz)
Input sensitivity/Input impedance
PHONO (MC):
PHONO (MM):
BALANCED:
CD/LINE:
P. DIRECT IN:
Output voltage/Output impedance
PRE OUT:
Maximum allowable PHONO input level (1 kHz)
MC:
MM:
RIAA deviation: (20 Hz−20 kHz)
S/N (IHF-A, 8 Ω)
PHONO (MC):
PHONO (MM):
BALANCED:
CD/LINE:
Tone control
BASS (50 Hz):
TREBLE (20 kHz):
Power requirement:
Power consumption (UL60065):
Standby power consumption:
For the purpose of improvement, the specifications and design are subject to change without
notice.
24
100 W × 2 (8 Ω)
200 W × 2 (4 Ω)
0.01 %
5 Hz − 45 kHz
5 Hz − 120 kHz ± 3 dB
100
260 μV / 100 Ω
2.7 mV / 47 kΩ
480 mV / 40 kΩ
240 mV / 20 kΩ
1.7 V / 20 kΩ
1.9 V / 220 Ω
10 mV
105 mV
± 0.5 dB
76 dB (0.5 mV Input, 1 W Output)
88 dB (5 mV Input, 1 W Output)
109 dB (4 V Input, Rated output)
108 dB (2 V Input, Rated output)
± 8 dB
± 8 dB
AC 120 V, 60 Hz
300 W
0.2 W

Index

v A
Accessories ·························································· 1
Adjust the levels (Left and Right) ······················· 12
Adjust the tone ··················································· 12
Adjust the volume ·············································· 11
Auto standby mode ············································ 20
v B
Batteries ······························································· 2
v C
Cable
Balance cable ····················································· 6
Pin-plug cable····················································· 6
Speaker cable ···················································· 6
Condensation ······················································· 2
Connection
5.1 Multi-channel Playback ······························ 17
Bi-wiring ····························································· 8
Cables ································································ 6
Player ································································· 9
Power Amp Direct ··········································· 19
Power cord ······················································ 10
PRE OUT connectors ······································· 19
Recorder ·························································· 10
Remote control connectors ····························· 20
Speaker ······························································ 8
Stereo complete bi-amp ·································· 16
v F
F.C.B.S. connection ············································ 14
Front panel ··························································· 4
v H
High frequency range ········································· 12
v I
INPUT SELECTOR ·············································· 11
Inserting the batteries ·········································· 2
v L
Low frequency range ········································· 12
v M
MM/MC cartridge select ···································· 21
Muting the sound ··············································· 13
v P
Protection circuit ············································ 7, 21
v R
Remote control ···················································· 5
v S
Speaker impedance ········································ 7, 21

Advertisement

Table of Contents
loading

Table of Contents