Rice Lake SURVIVOR CW-80 Operating Manual page 17

NET
Net
ZERO
MOTION
NEG
4 CW-80 Supervisor's Operating Guide
TARGET key
TARGET
When the CW-80 is set up in Target operating mode, pressing the
TARGET key acquires the weight on the scale as the desired target
value. The CW-80 then computes the Under and Over values around this
target value based on tolerance settings defined in the Setup mode.
ID
ID key
The ID key is used to call up and activate a particular ID number and its
Over/Under/Tare/Units register. The ID key is also used to store an ID
with its Over/Under/Tare/Units register.
NET, ZERO, MOTION, NEG Annunciator Lights
NET
Indicates that the CW-80 is in the Net Weight display mode.
ZERO
Indicates that the current displayed weight reading is within ± 0.25
display division (dd) of Zero.
MOTION
Indicates that the weight reading is unstable because the scale is "in
motion".
NEG
Indicates that the displayed digits represent a negative value.
kg
kg, g, lb, oz Annunciator Lights
g
kg
Indicates the unit of measure is kilograms.
lb
g
Indicates the unit of measure is grams.
oz
lb
Indicates the unit of measure is pounds.
oz
Indicates the unit of measure is ounces.
lb/oz
When both the "lb" and "oz" lights are illuminated, indicates that the
unit of measure is pounds and ounces.