Keyboard - HP ProBook 440 G2 Maintenance And Service Manual

Keyboard

NOTE: For a detailed list of available keyboards, see
Description
Keyboard, no backlight
Keyboard, backlit
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove both service doors (see
Remove the keyboard:
1. Remove the 2 Phillips PM2.5×6.0 screws that secure the keyboard to the computer.
2. Position the computer upright with the front toward you.
3. Open the computer as far as possible.
Sequential part number listing on page
Battery on page 42).
Service door on page 43).
Component replacement procedures
29.
Spare part number
767470-xxx
767476-xx1
55