Display assembly
Description
Display panel assembly, touch screen
Display panel assembly, touch screen, two antennas
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service doors (see
b.
Hard drive (see
c.
Optical drive (see
d.
WLAN module (see
e.
WWAN module (see
f.
Keyboard (see
g.
Top cover (see
Remove the display assembly:
1.
Position the computer upside down.
Battery on page
42).
Service door on page
Hard drive on page
45)
Optical drive on page
WLAN/Bluetooth combo card on page
WWAN module on page
Keyboard on page
55)
Top cover on page
58)
43).
49)
51)
53)
Component replacement procedures
Spare part number
782118-001
782531-001
89