Table of Contents
Advertisement
16.
Lift the bottom of the hinges upward (2), pull the top of the hinges out from under the tabs (3), and
then remove the display hinges from the display enclosure (4).
Display hinges are available in the Display Hinge Kit using spare part number 767438-001.
17.
If it is necessary to replace the display/webcam cable, lift the display/webcam cable assembly straight
up and off the display panel.
The display cable is available in the Cable Kit using spare part number 767431-001.
Reverse this procedure to reassemble and install the display assembly.
94
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Hide quick links:
Advertisement
Table of Contents
