Table of Contents
Advertisement
PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to PEAP-MSCHAP
l
Set Encryption to WPA TKIP
l
Set Auth Type to Open
l
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as
detailed in this section.
See
Sign-On vs. Stored Credentials
Click the Credentials button.
No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for
l
the User Name and Password when connecting to the network.
For Stored Credentials, User, Password and the CA Certificate Filename must be entered.
l
Enter these items as directed below.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
Click OK then click Commit. Ensure the correct Active profile is selected on the
6-28
for information on entering credentials.
Main
Tab.
Advertisement
Table of Contents
