Chapter 7: Key Maps; Mx3Plus 101-Key Equivalencies - Honeywell MX3PLUS Reference Manual

Chapter 7: Key Maps

MX3Plus 101-Key Equivalencies

The following keymap is used on an MX3Plus that is NOT running a Terminal Emulator. Terminal emulators use a
l
separate keymap (later in this section).
When using a sequence of keys that includes the 2nd key, press the 2nd key first then the rest of the key sequence.
l
When the computer boots, the default condition of NumLock is On and the default condition of Caps (or CapsLock) is
l
Off.
The Caps (or CapsLock) condition can be toggled with a 2nd+F1 key sequence.
l
The CAPS LED is illuminated when CapsLock is On.
l
The warmboot behavior of CapsLock can be set via the MX3-VXC Options tab in the Windows CE Control Panel.
l
To get this Key / Function
Power / Suspend
Volume
Backlight
2nd
Shift
Alt
Ctrl
Esc
Space
Enter
Scan
CapsLock (Toggle)
Back Space
Tab
Power
2nd F8
2nd F10
2nd
Shft
Alt
Ctrl
Esc
Spc
Enter
Scan
2nd F1
BkSp
Tab
Press these Keys in this Order
Left Scan key default value is Scan
Right Scan key default value is Enter
7-1