Usb Host / Usb Client Port; Usb Host Cable - Honeywell MX3PLUS Reference Manual

USB Host / USB Client Port

USB Host / Client connection is made through an optional USB Port if installed. The connector is an industry-standard 9-pin
"D" male connector. An Honeywell USB cable is required to adapt the connection to a standard USB connector.
RS-232 Serial Port
or
USB Client port
or
Caution: Do not use the RS-232 labeled port for cables with USB Plugs/Receptacles.
USB Host port
Caution: Do not use the USB-C or USB-H labeled port for serial tethered scanners.

USB Host Cable

ActiveSync --- Connect from USB-C port to USB Type A host e.g. desktop PC, laptop, etc.
2-8
Mobile Device End
1 Host Detect
2 Not Used
3 D + (Green Wire)
4 Not Used
5 Ground (Black Wire)
6 Not Used
7 D - (White Wire)
8 Not Used
9 Not Used
Goes To USB Type A Plug End
1
3
4
2