Recording - HIKVISION Digital Video Recorder Quick Start Manual

Quick Start Guide of Digital Video Recorder
No. Name
2 Live View Window
3 Play Control Bar
PTZ Control
4
Video Parameters
5
Configuration
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon Description
Select the window-division mode
Start/Stop all live view
/
Capture pictures in the live view
mode
Start/Stop all recording
/
Enable/Disable digital zoom
/

Recording

Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1. Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Record Schedule to enable recording schedule.
4. Click Edit to edit record schedule.
Description
channel.
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and calling.
PTZ function can only be realized if the connected camera supports PTZ
control.
Brightness, contrast, saturation and hue of the image can be edited.
button on the toolbar to start the live view of all cameras on the device list.
27
Icon Description
Previous page
Next page
Open/Close audio
/
Start/Stop two-way Audio
/
Adjust volume