HIKVISION Digital Video Recorder Quick Start Manual page 5

Quick Start Guide of Digital Video Recorder
As the installation steps of HDD are similar among different models, here we take the steps of the
DS-7200HGHI-SH as an example.
Steps:
1. Remove the cover from the DVR by unfastening the screws on the back and side.
2. Connect one end of the data cable to the motherboard of DVR and the other end to the HDD.
3. Connect the power cable to the HDD.
4. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.
5. Re-install the cover of the DVR and fasten screws.
4