Table of Contents
Advertisement
3.3.2 Advanced
This page makes more detailed settings for the AP. Advanced Wireless Settings page
includes items that are not available in the Basic Wireless Settings page, such as basic
data rates, beacon interval, and data beacon rate.
Advanced Wireless
BG Protection Mode: It provides 3 options, including Auto, On, and Off. The default
BG protection mode is Auto.
Beacon Interval: The interval time range is between 20ms and 999ms for each
beacon transmission. The default value is 100ms.
Date Beacon Rate (DTM): The DTM range is between 1 ms and 255 ms. The default
value is 1ms.
Fragment Threshold: This is the maximum data fragment size (between 256 bytes
and 2346 bytes) that can be sent in the wireless network before the router fragments
the packet into smaller data frames. The default value is 2346.
RTS Threshold: Request to send (RTS) is designed to prevent collisions due to
hidden node. A RTS defines the biggest size data frame you can send before a RTS
handshake invoked. The RTS threshold value is between 1 and 2347. The default
value is 2347.
If the RTS threshold value is greater than the fragment threshold value, the RTS
handshake does not occur. Because the data frames are fragmented before they
reach the RTS size.
Tx Power: The Tx Power range is between 1 and 100. The default value is 100.
Short Preamble: Select Disable or Enable.
37
Advertisement
Table of Contents
