E-Mail Direct Push; Setting Up An E-Mail Account - Mio DigiWalker A701 User Manual

E-mail Direct Push

Your A701 incorporates the Messaging & Security Feature Pack (MSFP). When
connected to the Exchange Server that supports Microsoft Exchange 2003
Service Pack 2 (or later), A701 receives real-time notifications of new e-mails
via the Direct Push technology. New e-mails are automatically downloaded to
A701 from the Exchange Server; you do not need to check or download e-mails
manually.
Before using the Direct Push feature, you need to set up a synchronization
relationship between your A701 and Exchange Server and complete the initial
synchronization. (See "Synchronizing Directly with the Exchange Server" in
section 6.1 for more information.)

Setting up an E-mail Account

You need to set up an e-mail account that you have with an Internet service
provider (ISP) or an account that you access using a VPN server connection
(typically a work account) before you can send and receive mail.
1. Tap
Messaging
2. Tap the
Menu
3. Enter your e-mail address, and tap
Auto configuration
that you do not need to enter them manually.
4. Once
Auto configuration
5. Enter your name (the name you want displayed when you send e-mail), user
name and password.
6. Select the account type and name, and tap
7. Enter the server information, and tap
8. Decide if you want to download e-mail messages of the new account
immediately.
NOTE: You cannot add a new account while connected. Tap the Menu soft key
Send/Receive to disconnect.
Microsoft Pocket Outlook
.
soft key
Tools
attempts to download necessary e-mail server settings so
has finished, tap
.
New Account
.
Next
.
Next
.
Next
.
Finish
Stop
5-15