Voice Call; Placing A Voice Call; Receiving A Voice Call - SoftBank 840SC User Manual

Voice Call

Placing a Voice Call

Directly enter phone number to call.
To place a call from Phone Book, see "Calling from
3
Phone Book" (fP.2-15).
a
Enter phone number including area
code
Phone Number
Entry Window
b
Confirm entered phone number
t / f (
→
c
To end the call
3-2
・ To correct entered digit, press c. Press c for
1 + seconds to delete all.
・ To enter P (pause), press * twice. To enter
(International Code), press 0 for 1 + seconds.
・ When the line is busy, press y to end the call
and try again later. If Auto redial (fP.14-11) is On,
number is automatically redialed. Press i (cancel) /
y to cancel redialing.
・ When Stereo Earphone Microphone (optional) is
connected and Earphone call is set to On in
Standby, press Stereo Earphone Microphone switch
for 1+ seconds to call specified phone number.
Press it again for 1 + seconds to end the call.
・ To input numbers for automatic voice service
guidance, enter using Keypad.
→
)
y

Receiving a Voice Call

a
Voice Call window appears, t
+
→
b
To end the call
・ To put caller on hold, press y. To connect the
call, press t.
・ To adjust ringer volume, press n / b.
・ If Stereo Earphone Microphone (optional) is
connected, press Stereo Earphone Microphone
switch for 1 + seconds to accept Voice Calls. Press
it again for 1 + seconds to end the call.
・ Missed Call Window
Missed call window appears for unanswered calls.
Select View to view incoming calls (fP.3-9).
・ Ringtone
Specify Ringtones by Phone Book entry or Category
(fP.2-18, P.2-20). If they are not set, they will ring
according to the activated mode (fP.1-12).
If Security → Secret mode is set to Hide when
a call from a secret entry is received, the handset
will ring according to the activated mode.
y