Receiver - RFXCOM RFXtrx User Manual

5.1.

Receiver

The RF protocols to be received can be configured on the Main tab at Set Mode.
Click Save Settings to save the selected protocols in non-volatile memory of the RFXtrx. This
configuration is now restored every time after a power up.
Note that these settings are lost after a firmware update and need to be set again.
Note: Protocol enabling is only necessary for receive. Transmit protocols are always enabled.
The received RF data is decoded and displayed in the yellow window.
RFXtrx Version 5.06 page 15 / 39
Copyright 2011-2015, RFXCOM