Table of Contents
Advertisement
5.1.
Receiver
The RF protocols to be received can be configured on the Main tab at Set Mode.
Click Save Settings to save the selected protocols in non-volatile memory of the RFXtrx. This
configuration is now restored every time after a power up.
Note that these settings are lost after a firmware update in Type1 or Type2 firmware and need
to be set again.
Note: Protocol enabling is only necessary for receive. Transmit protocols are always enabled.
The received RF data is decoded and displayed in the yellow window.
RFXtrx Version 5.68
page 24 / 70
Copyright 2011-2020, RFXCOM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RFXtrx Series and is the answer not in the manual?
Questions and answers