Install The Usb Driver; Run Rfxflash On Linux Under Mono - RFXCOM RFXtrx User Manual

3. Install the USB driver

The RFXtrx has the FTDI FT232R USB interface chip installed.
The USB drivers are available at

4. Run RFXflash on Linux under Mono

Open a Terminal screen in Linux (Ctrl-Alt-T)
Execute once:
Install Mono:
[sudo] apt-get install mono-runtime
Install VisualBasic support under Mono:
[sudo] apt-get install libmono-microsoft-visualbasic8.0-cil
If the USB device is created as ttyACMx you will need to create a link between
/dev/ttyACMx and a serial port /dev/ttySx.
This is not necessary if the device is created as /dev/ttyUSBx !!
[sudo] ln -sf /dev/ttyACM1 /dev/ttyS3
Note: sudo must be entered without brackets [ ]. sudo is required if not running as super user.
Launch the RFXflash.exe program.
[sudo] mono RFXflash.exe
Note: RFXmngr does not operate under mono!
Copyright 2011-2015, RFXCOM
http://www.ftdichip.com/Drivers/VCP.htm
RFXtrx Version 5.06 page 13 / 39