Manual Mode - Orbit T977 Owner's Manual

9. FAN button: Press this button to operate or stop the fan.
10. When the treadmill is under standby mode, press both SPEED+ and INCLINE+ for about 3 seconds.
You will hear the buzzer make a sound "BI", then the change between Kilometer and Mile will be finished,
and the LED light will be shown accordingly.
START-UP QUICKLY (MANUAL):
1, Turn the power switch on, and then attach the safety key to the computer.
2, Press START button，the system will enter into 3 seconds count-down, the buzzer will make the sound
"Bi" and the TIME window will start to count down, then the speed will run 1.0km/hour or 0.6MPH after 3
seconds.
3, After start-up, you can press "SPEED+" and "SPEED-" adjust the speed and "INCLINE+", "INCLINE-" to
adjust the incline.
THE OPERATION OF EXERCISE PROCESS:
1, Pressing speed-down will decrease the running speed.
2, Pressing speed-up will increase the running speed.
3, Pressing incline-down will decrease the incline level.
4, Pressing incline-up will increase the running level.
5, Pressing STOP will reduce the speed until the treadmill stops.
6, When the user holds the hand pulse about 5 seconds, it will display pulse data.

MANUAL MODE:

1, When the treadmill is under the standby state, press START button, the treadmill will start to run from
the speed 1.0km/h and the inline of "0" level. The other windows will also start to count up from "0", press
"INCLINE+","INCLINE-", "SPEED+", "SPEED-" to change the incline and speed.
2, Set up the TIME, press "MODE" button to enter into time count-down, the TIME window will display
"15： 00" and glitter. Press "INCLINE+","INCLINE-", "SPEED+", "SPEED-" to set up the time that you need.
The setting range is 5:00-99:00.
3, In TIME setting mode, press " MODE " button to enter into distance count-down, the DISTANCE
window will display "1.0" and glitter. Press "INCLINE+","INCLINE-", "SPEED+", "SPEED-" to set up the
distance that you need. The setting range is 0.5—99.9.
4, To set up the CALORIES, press "MODE" button to enter into calories count down, the CAL window
will display "50' and glitter. Press "INCLINE+","INCLINE-", "SPEED+", "SPEED-" to set up the calories
that you need. The setting range is 10-999.
11