Installation And Connection; Directly On The Ground; Anchoring; Water Connection - IPSO WE 55 Instruction Manual

Installation and connection

Surface

Anchoring

E
F
D
C
B
A
E
B
A

Water connection

The machine must be securely fixed on a flat surface (metal base, concrete or solid
ground). The anchoring is to be done on the provided places (A) in the base. (See
Dimensions 2)
The machine must be placed entirely level. For easy maintenance it is recommen-
ded to keep a minimal distance of 600 mm between the wall and the back of the
machine.
If several machines are placed next to each another, there should be a minimal
distance of 30 mm between each machine.
On a metal base
D
The machines must be fixed on a metal base which is securely anchored on a
C
concrete base.
A: Bolt M12 (WE55/73/95), M16 (WE110/132/165)
B: Concrete base (WE55/73: 20cm, WE95/110: 30cm, WE132/165: 40cm)
G
C: Washer 40x17x4
D: Nut M12 (WE55/73/95), M16 (WE110/132/165)
E: Base of the machine
F: Metal base

Directly on the ground

The machine must be anchored directly on a concrete base.
D
A: Bolt M12 (WE55/73/95), M16 (WE110/132/165)
C
B: Concrete base (WE55/73: 20cm, WE95/110: 30cm, WE132/165: 40cm)
C: Washer 40x17x4
D: Nut M12 (WE55/73/95), M16 (WE110/132/165)
E: Base of the machine
The machine is delivered with hoses with 3/4" connections. These hoses fit the
water inlet valves of the machine and the main water inlet taps. To ensure the
optimal functioning of the water inlet valves, the water pressure on the inlet should
be between 0,5 and 10 kg/cm² (7 and 145 psi). If the pressure is too low, the cycle
time will increase considerably.
In case of boiler fed machines, a minimum of hot water of 90°C should be available:
For the WE55: 50 l. WE110: 90l.
For the WE73: 65 l. WE132: 120l.
For the WE95: 80 l. WE165: 140l.
3
8