2. Thread the lifting eye into the flywheel hub for a minimum of
five turns.
3. Connect a hoist to the lifting eye.
4. Lift the outboard and place it on the boat transom.
Lifting Eye
Steering Cable ‑ Starboard Side Routed Cable
1. Lubricate O‑ring seal and entire cable end.
95
Tube
Description
Ref No.
2-4-C with
95
PTFE
OUTBOARD INSTALLATION
a
2756
O-ring seal and entire cable
a -
28495
Threads into the flywheel to
remove the powerhead
assembly from the driveshaft
housing, or to lift entire engine
for removal/installation.
Where Used
end
110
Lifting eye
91‑90455‑‑1
3724
Part No.
92-802859A 1
eng