Mercury 225 Manual page 147

IMPORTANT: The idle stop screw must be touching the stop.
a
d. Adjust the cable barrel if necessary.
5. Lock the barrel holder in place with the cable latch.
FRONT CLAMP ASSEMBLY INSTALLATION
IMPORTANT: There must be sufficient slack in the engine wiring
harness, battery cables, fuel hose, and oil hoses, between clamp
and engine attachment point, to relieve stress and prevent hoses
from being kinked or pinched.
1. Place the lower half of the front clamp into the bottom cowl
opening.
eng
OUTBOARD INSTALLATION
b
a -
b -
2680
135
Idle stop screw
Idle stop
2682