Installing The Main Unit - Clarion NZ502E Owner's Manual & Installation Manual

5. Installing The Main Unit

Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Insert the main unit into the universal
mounting bracket until it locks.
3. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
7-3/16" (182 mm)
Hole
Screwdriver
Outer escutcheon
58 NZ502E
Hole
Stoppers
Main Unit
2-Spring
Note:
Set the outer escutcheon
so that its metallic part on
the back side fits the upper
edge of the main unit.
Figure 5
Note:
• Some car models require special mounting kits for
proper installation. Consult your Clarion dealer for
details.
• Fasten the front stopper securely to prevent the
main unit from coming loose.
Instrument panel
Universal mounting bracket
Stoppers
Hexagonal
bolt