Installing The Main Unit - Clarion CZ21 5A Owners Manual And Installation Manual

Installing the Main Unit

1. Place the universal mounting bracket into the instrument panel, use a screwdriver to
bend each stopper of the mounting bracket inward, then secure the stopper. (Figure 4)
2. Wire as shown on page 29.
3. Insert the main unit into the universal mounting bracket.
4. Mount the outer escutcheon so that all the hooks are locked. (Figure 7, 8 on page
28)
Notes:
• Some car models require special mounting kits for proper installation. Consult your Clarion
dealer for details.
• Fasten the front stopper securely to prevent the main unit from coming loose.
Screwdriver
• Console opening dimensions
CAUTION
PRECAUTION
Push in the protruding part (STOPPER) as shown in the Figure 5. When this main unit is
installed without the universal mounting bracket.
26
CZ215A/CZ315A
Stopper
Main Unit
Stopper
Outer Escutcheon
Figure 4
182mm
Hole
Instrument Panel
Universal Mounting Bracket (included)
(included)
Hexagonal bolt
Strap
Spring