Emerson 1F94-80 Operation Manual page 33

8. Repeat steps 2 through 5 to check cooling
times and temperatures.
RUN
9. Press to begin program operation.
PRGM
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
SYSTEM
Press until OFF is displayed. Reattach
SWITCH
thermostat to subbase. Then press
select the operation mode you want (HEAT,
COOL, AUTO).
When you have completed programming, you
may set option switch #4 (see TOTAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).
SYSTEM to
SWITCH
33