Emerson 1F94-80 Operation Manual page 26

This display window shows that for Monday's
occupied heating period, the start time is
8:00 AM, 70° is the programmed tempera-
ture, and the fan is set to PRG FAN (continu-
ous fan operation); this example reflects
factory preprogramming, where 70° is the
HEAT O temperature.
3. To change the displayed start time to your
selected start time for Monday's occupied
heating period, press
selected time appears. The time will change
in 15 minute increments.
4. If the temperature displayed is not the heat-
ing temperature you want for Monday's oc-
cupied period, press
continue to press
26
TIME or TIME until your
FWD BACK
or (if you
or , the display
will alternate between the HEAT O and
HEAT U temperatures you previously se-
lected).
NOTE
The fan and damper operation are linked to the
occupied or unoccupied temperature selec-
tions, not to the occupied or unoccupied time
periods. The programmable fan feature works
only during periods with occupied temperature
settings, and the damper will only operate dur-
ing periods with occupied temperature settings.
Therefore, we suggest that you program occu-
pied temperatures during occupied periods and
unoccupied temperatures during unoccupied
periods.