Table of Contents
Advertisement
8. To enter Tuesday's through Sunday's heat-
ing programs, use the
USING THE HOLD/COPY BUTTON), or
press
ADV
until the correct day's abbrevia-
DAY
tion appears in the display. Repeat the
above steps to program each day's heating
periods and temperatures.
9. When you have completed programming
your heating periods and temperatures,
press
RUN
to begin program operation.
PRGM
Enter Cooling Program
CAUTION
!
If outside temperature is below 50
recommend that you remove the thermo-
stat from the wall before proceeding with
28
HOLD
button (see
COPY
°
F, we
the following steps to program cooling
temperatures. Personal injury or prop-
erty damage may occur due to air condi-
tioner operation during cold weather. A
fresh 9 volt Energizer
must be installed to perform off-wall pro-
gramming. Programming away from the
wall should prevent accidental compres-
sor operation. BE SURE SYSTEM
SWITCH IS SET TO OFF POSITION BE-
FORE REATTACHING THE THERMO-
STAT TO THE SUBBASE!
SYSTEM
1. Press
until COOL is displayed.
SWITCH
2. Press
VIEW
once. MO, the abbreviation for
PRGM
Monday, and the letter O, representing the
occupied cooling period, will appear in the
®
alkaline battery
Advertisement
Table of Contents
