Emerson 1F94-80 Operation Manual page 29

display. Also displayed are the currently
programmed start time for the occupied
cooling period and the currently programmed
COOL O temperature.
3. To change the displayed start time to your
selected start time for Monday's occupied
cooling period, press
selected time appears. The time will change
in 15 minute increments.
4. If the temperature displayed is not the cool-
ing temperature you want for Monday's oc-
cupied period, press
continue to press
will alternate between the COOL O and
COOL U temperatures you previously se-
lected).
TIME
or TIME until your
FWD
BACK
or (if you
or , the display
NOTE
The fan and damper operation are linked to the
occupied or unoccupied temperature selec-
tions, not to the occupied or unoccupied time
periods. The programmable fan feature works
only during periods with occupied temperature
settings, and the damper will only operate dur-
ing periods with occupied temperature settings.
Therefore, we suggest that you program occu-
pied temperatures during occupied periods and
unoccupied temperatures during unoccupied
periods.
5. If you want the fan to run continuously
during Monday's occupied period, press
FAN
until PRG FAN is displayed (re-
SWITCH
member, this feature only works if you have
29