Emerson 1F94-80 Operation Manual page 24

SET
5. Press once. The display will show the
CLOCK
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
7. Press RUN once. The display will show the
PRGM
correct time and room temperature alter-
nately.
Program Heating/Cooling Temperatures
During programming, if you don't press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume pro-
24
TIME or until you
TIME
FWD
BACK
gramming after this happens, press
you are at the point where you stopped program-
ming. Then you may continue to enter your
program normally. If you want to stop program-
ming at any time, simply press
program operation.
SYSTEM
1. Press
SWITCH
VIEW
2. Press once. The display will continue
TEMP
to show HEAT. Beside HEAT is the letter O,
representing the occupied heating tempera-
ture (HEAT O). At the right of the display is
the currently programmed HEAT O setting.
3. Press either
temperature to your selected HEAT O set-
ting.
VIEW
PRGM
RUN to resume
PRGM
until HEAT is displayed.
or to change the
until