Emerson 1F94-80 Operation Manual page 17

between heat pump heating and cooling
cycles. The following may cause a time
delay in COOL:
a) Return of power after a power outage.
SYSTEM
b) Pressing
SWITCH
modes.
c) Pressing
for HEAT or COOL too soon after a
previous call.
• TOTAL KEYPAD LOCKOUT — When op-
tion switch #4 is in the total keypad lockout
position (ON), programs cannot be altered
and all buttons are disabled.
to change operating
or , creating a call
Programming should be completed and bat-
tery should be installed before changing op-
tion switch #4.
TOTAL KEYPAD LOCKOUT (ON)
ON
Switch #1 set at installation (DO NOT CHANGE)
Switch #2 set at installation (DO NOT CHANGE)
Switch #3 (see EMR)
Switch #4 ON
To enable total keypad lockout, press
SYSTEM
until OFF is displayed and remove
SWITCH
the thermostat body from the wall. Press
NOTE
1 2 3 4
17