Advertisement
3.3) AUTO LAP, UNITS, and USER can also be set in RUN quick SET mode.
3.4) HRM and HRM LINK can also be set in HRM quick SET mode.
3.5) TIMER segments can also be set in TIMER quick SET mode.
3.6) ALARM can also be set in ALARM quick SET mode.
Step 4) Acquire Satellite signals:
In order to get the correct time of day and begin using your watch, you have to acquire the Satellite signals. It may take a few
minutes to get the signals.
4.1) Go outside to an open area away from tall buildings and trees. Orient the GPS antenna towards the sky for best
reception. The antenna is located at the 12 o'clock position of the watch.
4.2) Stand still and do not begin moving while locating the Satellites until the GPS signals are already received.
Advertisement
