Advertisement
This Watch has a Night mode function. Following are the options in SET mode and their functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON
– Default Start Time / END Time for NIGHT ON setting is 5 PM to 7 AM. Following are the characteristics of
NIGHT ON setting:
•
Start Time and END TIME for NIGHT ON setting can be changed in SET mode/ NIGHT.
•
When the Night setting is ON, pressing any button within the Start Time / End Time will turn ON the EL for
10 seconds.
•
Outside the Start time / End Time, only press S11 will turn ON the EL for 10 seconds.
•
When the chronograph is running within the Start Time/ End Time, the EL will be always ON. It will turn
OFF 10 seconds after the chronograph is stopped.
•
How to enter TIME mode:
Travelling between different Time zones
•
When you are traveling to a different Time zone, you have to set your GPS Watch to your destination Time zone. We
recommend setting Time 1 to your current location and Time 2 set to your destination Time zone.
•
When you arrive to your destination Time zone, press & hold S3 for 2-3 seconds to change the time to Time 2.
•
When you go back to your original location (Time 1), press & hold S3 for 2-3 seconds to change the time back to Time 1.
•
The Time of the Watch will be synchronized with GPS TIME when you turn ON the GPS.
•
Make sure that the Watch is set to the correct CITY CODE and DST ON or OFF setting so that it can display the correct
time.
•
Follow the diagram below enter DATA mode, view the details, or delete files.
EL backlight:
TIME mode
DATA mode
Advertisement
