Advertisement
Battery:
The Watch is using a rechargeable Lithium Ion battery that will require approximately 4.0 hours charging time using the USB
cable. While battery is charging, the Watch cannot be used and all buttons are disabled. User needs to recharge the battery
when the Watch indicates a "low battery".Battery Life (full charge): 8 hrs typical (continuous GPS).
GPS watch troubleshooting guide:
PROBLEM/ QUESTION
I cannot get a GPS signal
Can I reset the Watch?
Will my data and personal settings be
lost after Watch reset?
The battery indicator does not seem to
be accurate
My heart rate data seems inaccurate.
Take your GPS Watch outdoors and away from trees and tall buildings. Remain
stationary and try acquiring GPS signal again. Be sure that the antenna is pointing
towards the sky for better signal reception.
You can reset the Watch by pressing S1, S5, S7, and S11 together. The date and
time will be reset to default values. You can set it again manually or automatically
thru GPS.
Your data and personal settings are saved in the flash memory and will not be lost
after Watch reset.
Allow your GPS Watch to fully discharge and then fully charge it without interruption.
It is recommended to regularly re-charge your battery every 1-2 months even if it is
not used to maintain good battery condition.
- Make sure the HR belt is snugly fit to your body
- Reapply water or electrode gel to the electrode of the HR belt
- Clean the electrodes from possible contamination that may interfere with heart rate
signals
- Wear a cotton shirt or if possible, wet your cotton shirt. Synthetic fabrics that rubs
with your skin may create static electricity and interfere with the heart rate signal
- Move away from strong electromagnetic fields and other wireless sensors which
can interfere with your heart rate sensor. Possible sources of wireless interference
may include high voltage power lines, electric motors, microwave ovens, cordless
phones, and wireless LAN or access points.
SOLUTION/ ANSWER
Advertisement
