Advertisement
•
Set the interval timers first in SET mode before starting the TIMER mode.
•
Any timer segment can enter TIMER setting mode.
•
When a timer segment counts down to zero, the next segment will auto start counting down.
•
Timers will loop for maximum of 199 and then auto stop.
•
Timer cannot be saved in Memory
6.4.2. How to START, STOP, and Reset the Timer:
6.4.3. How to view the various Timer segment:
Step 7) Download your data to PC:
The Watch comes with PC software to make communication between your Watch and PC easy and enjoyable. Please install
the PC software to your PC using the installer provided. The Watch is using a USB PC link cable to connect the Watch to PC.
Run the GPS PC software on your PC. Plug the USB cable with the Watch clamped in the other end of the cable. PC
software will then prompt you to download the data. Click the download button to begin downloading. The PC software will
prompt to delete the data in the Watch. User has the option to delete the data in the Watch or not. The PC software
installation and instruction guide can be found at the end of this manual. Please take time to read the guide.
The Watch has the following main modes: Time, Run, Chronograph, Data, Alarm and Set modes. Press S7 to scroll through
these modes. Press S1 from Time mode will also go to RUN mode.
General Operations
Advertisement
