Advertisement
•
Click the USER setting in the HOME page of the PC software.
•
The PC software will display the various parameters to be set. Fill in all the required information.
•
After filling in all the required information, click the Synchronize with your computer button at the bottom
right of the screen.
•
The PC software will prompt you will successful synchronization. Or Try again message if it fails. It will also
display errors if there are invalid inputs on required fields. Correct the invalid inputs and try again.
2.2) Getting the GPS Watch setting and copy it to GPS NE PRO PC software:
•
Connect the GPS Watch to the PC using the USB Charging clip/ Data cable.
•
Click the USER setting in the HOME page of the PC software.
•
The PC software will display the various parameters to be set.
Click the GET SETTING button at the bottom center of the screen.
All the GPS Watch settings are now copied to the PC software.
Advertisement
