Advertisement
6.1.4. How to change the information displayed in the Lower row in RUN mode.
Note: The watch will remember your previous screen view the next time you come back to RUN mode.
6.1.5. How to view your current data before saving while the chronograph is stopped. Following are the information as
you press S3:
Notes:
•
Before going for a run exercise, it is highly recommended that you set your user profile first so that the calories will
be calculated properly. Go to SET mode/USER.
•
When the Chronograph is stopped and reset in RUN mode, if no activity for 10 minutes, the GPS will be on Standby
mode ( GPS ring icon flashing) and return to TIME mode.
•
While in RUN mode, then the GPS signal suddenly becomes weak lost for any reason, the Watch will display
LOST GPS signal until it receives GPS signal again.
•
Maximum of 15 hours of track record / 30 data files/ 100 laps for each data file can be saved in memory.
6.2) Using Chronograph mode:
RUN mode & CHRONO mode has the same chronograph counter. When the chronograph is started or stopped in RUN
mode, the same thing happens in CHRONO mode.
Advertisement
