General Specifications - Excel X-power 10 User Manual

GENERAL SPECIFICATION DATA
Batteries 2 x 12 Volt
sealed gel
Speed
Range
Climbing performance
Brakes
(on both rear wheels)
Seat height
Seat width
Total width (normal)
Total width (folded)
Total length
Total height
Total weight
Tire pressure
PU TIRES
No inflation necessary, 12½" x 2½" rear wheels.
PARKING BRAKES
Wheel locks should be checked regularly to ensure grip.
The purpose of the wheel locks is to hold the powerchair in place when it is
stopped, not to slow it down when it is moving.
Always engage both locks before entering or exiting the powerchair.
Never stand on the footrests while entering or exiting the powerchair. Standing on
the footrests could cause the powerchair to tip over.
The owner should enter or exit the powerchair only after the power is turned off.
TURNING RADIUS
It is very important, especially when travelling on inclines, to reduce your speed
with the control lever before making a sharp turn. Never try to turn the powerchair
suddenly while travelling at full speed.
Your powerchair should not be operated on streets except when using the
crosswalks. Operate your powerchair with extreme caution.
31 Ah, maintenance free,
0 – 6,5 km/h
Approximately 25 km on level ground
with 91 kg occupant
Up to 25% (1 in 4) on form dry
ground. Up to 20% (1 in 5) on loose
ground (gravel, loose chips, grass,
sand etc.)
Regenerative motor brakes,
elektromagnetic safety brakes and
parking brakes.
52 cm
41 – 46 cm standard, 38 – 43 cm
optional
55 – 57 – 60 – 63 cm
36 cm
106 cm
101 cm
53 kg
2-2.5 BAR (30-37 psi)
16