Table Of Contents; About These Instructions - Weller WD 1 Operating Manual

WD 1 (M) / WD 1000 (M)
Contents
1 About these instructions ............................................................ 3
2 For your safety ........................................................................... 4
3 Scope of supply ......................................................................... 4
4 Device description ..................................................................... 5
5 Starting up the device ................................................................ 7
6 Operating the device .................................................................. 8
7 Special functions ........................................................................ 9
8 Resetting to factory settings ...................................................... 17
9 WD 1 (M) / WD 1000 (M) care and maintenance ...................... 17
10 Fault messages and fault elimination ........................................ 17
11 Accessories ............................................................................... 18
12 Disposal ..................................................................................... 18
13 Warranty .................................................................................... 18

1 About these instructions

Thank you for placing your trust in our company by purchasing
the Weller WD 1 (M) / WD 1000 (M). The device has been
manufactured in accordance with the most rigorous quality
standards, which ensure that the device operates perfectly.
These instructions contain important information for safe and correct
initial operation of the WD 1 (M) / WD 1000 (M) soldering station,
including continued operation, maintenance and self-correction of
simple faults.
Read these instructions and the accompanying safety information
carefully before switching on the device and starting work with
the WD 1 (M) / WD 1000 (M) soldering station.
Make sure that all users have access to these instructions.
1.1 Applied directives
The Weller microprocessor-controlled WD 1 (M) / WD 1000 (M)
soldering station conforms to the specifications of the EC
Declaration of Conformity with Directives 2004/108/EC and
2006/95/EC.
1.2 Documents also applicable
− Operating instructions for soldering station
WD 1 (M) / WD 1000 (M)
− Safety information booklet accompanying these instructions
3-18