Intermec SF61 User Manual page 50

Chapter 2 — Connect the SF61B
38
• Right-click the Bluetooth icon in the Windows system tray and
choose Open Settings (or its equivalent).
A Bluetooth settings window is displayed.
Under the Options tab (or equivalent), activate the following
•
options or their equivalents:
Allow Bluetooth devices to find this computer
Allow Bluetooth devices to connect to this computer
Alert me when a new Bluetooth device wants to connect
• Under the COM Ports tab (or equivalent):
Note the host computer's Incoming COM port. If there is no
incoming COM port, you must create one.
• Under the Hardware tab (or equivalent):
Select Properties > Advanced and note the host computer's
Bluetooth address.
4 Create a Bluetooth connection bar code in EasySet
Run the EasySet scanner setup software and select the SF61B
•
product (Product > Select > Handheld scanners > SF61B).
In the EasySet commands window, open the Interface >
•
Bluetooth > Bluetooth connection folder and chose
Bluetooth Quick Connect.
• Double-click the Compose BT address command to enter the
host's Bluetooth Device Address (BDA) you noted previously
(see above), and click OK to confirm.
A Bluetooth association bar code is created containing the
BDA of your host computer.
5 Read the Bluetooth connection bar code. You may be able to read
it on the screen in EasySet, if not you can print it out as a label and
perhaps stick it on your host device where it is easy to read
(suggestion).
The blue Intermec Ready-to-Work indicator blinks slowly for 5
minutes to indicate it is waiting to connect (default scanner
behavior).
SF61 Cordless Scanner User's Guide